General Motors' 15-Year Legacy of Performance Dominance Continues
by Chris R.
While the driver provides the soul of a car, the engine is its heart. The performance car market has been dominated the last 15 years by a series of V8 engines made by General Motors.
Beginning with the LT1, which debuted in the 1992 Chevrolet Corvette, followed by the LS1 in 1997 and now the LS3, GM has been on a streak of successful performance V8 engines that is unmatched. The 5.7 liter LT1 engine is closely related to the original Small Block Chevy V8 (dating back to 1955), but with several key improvements. It is best known as the powerplant for the 1992-1996 Corvette and the Chevrolet Camaro and Pontiac Firebird from 1993-1997, but also made its way into the Impala SS and even Caprice police package cars.
Chevy LS2 Corvette Engine
The LT1 in Corvette form made 300 horsepower, which was an amazing number in the early 90s. Several technological improvements made this possible, such as a new set of high-flow aluminum cylinder heads and a short runner intake manifold. A highlight of LT1 engine is that it employs reverse flow cooling, sending coolant to the cylinder heads first, which enables the LT1 to run more ignition advance and a high-for-its-time 10.4:1 compression ratio for greater horsepower. However, LT1 engines did not remain in service for long. The entire LT family of engines (LT1, the High-Output LT4 and the L99 "baby LT1") had to make way for the next generation LS1.
The 5.7 liter LS1 engine debuted in the 1997 Corvette and went on to be listed on Ward's 10 Best Engines the same year. The LS1 represents a clean-sheet approach-it shares nothing in common with the original Small Block V8 or LT1. Over the LS1's lifespan, it made its way into thousands of Corvettes, Camaros, Trans Ams, and the 2004 Pontiac GTO. It also formed the basis for the Vortec line of GM truck engines. The 350 horsepower LS1 featured all-aluminum construction, with a composite plastic intake manifold, single bore throttle body, and high-flow cylinder heads that re-wrote the book on aftermarket performance in the late 1990s.
The LS1 inspired a new generation of performance enthusiasts. Using the power of internet to share ideas and technical knowledge, this new generation has helped create a second golden-age of the muscle car. The LS1 drove a whole new era of aftermarket modification, and the superb design of the motor meant it was easy and cheap to make more and more horsepower.
The successor to the LS1 is the LS2, a relatively short lived engine that used a slightly larger displacement and upgraded heads to produce 400 horsepower. The 6.0 Liter LS2 was used in the Corvette from 2005-2007, the 2005 and 2006 GTO, and the Trailblazer SS.
The LS3 engine is the latest engine on its way to power the Corvette in 2008. Although based on the LS1, it produces an amazing 430 horse power. It is an updated version of the LS2 engine with a larger bore of 4.06 inches resulting in a displacement of 6.2 liters, 0.2 litres higher than the LS2 engine. The LS3 uses a set of cylinder heads based on those found on the 7.0 liter, 505-hp Corvette LS7. There is much speculation that the LS3 will find its way into the 2009 Camaro as well.
The success of the LT1 and LS1 series of engines has forced other auto makers to come up with new engine packages to compete. Chrysler introduced an all new Hemi V8 in 2003 which borrows extensively from the LS1 design. Ford has resorted to superchargers on its line of "modular" V8s to compete with the power output of the LS series GM engines.
Article Source: ArticleRich.com
Back to the Muscle Car Article Index Pg. 2 -->